Get the Most from Your Digital Paper
TIMES ARE tough. To save money, you might be tempted to load less expensive sheets into your digital printers, rather than those developed specifically for digital printing.
But don't do it, the experts warn. Digital papers will save you money (and headaches) in the end by yielding better ink transfer and adhesion, fewer jams, increased uptime and less waste. Also, says Glatfelter's Melissa Klug, using the wrong paper could ultimately harm your equipment.
"You will end up with increased service costs with your extremely expensive and valuable digital equipment," she says. "Digital papers are specially manufactured to meet the exacting specifications of today's digital equipment; it is not the same paper in a different wrapper."
There's also the curl factor, adds Cindy Hamrick, of Hammermill Paper. Offset papers contain about 6 percent moisture, she says, while digital papers have 4.5 percent.
"In general, papers with a high moisture content (over 5 percent) show a high propensity for curl in digital equipment and produce more print mottle."
Adds Boise's Kirk Krahn, "Digital papers generally have a smoother surface to allow for better print quality [i.e. toner adhesion] in comparison to less expensive sheets."
How about using papers designed for inkjet on your toner device, or vice versa?
"There is a huge difference in inkjet and toner papers," notes Molly Rosenthal, of Mohawk Fine Papers, Inc. "Inkjet papers are designed to fix the ink and absorb moisture."
"A sheet designed for toner-based printing may not have the proper holdout necessary for the water-based, low viscosity of inkjet applications," adds Russ Leone, of Boise.
"Problems can arise with substitutions," agrees Appleton's Jason Morgan. "Inkjet papers do not contain enough resin to bind toners well, while papers that work well with toner are not absorbent enough to give good inkjet print quality."
Related story: Digital Paper Tips
Bob has served as editor of In-plant Graphics since October of 1994. Prior to that he served for three years as managing editor of Printing Impressions, a commercial printing publication. Mr. Neubauer is very active in the U.S. in-plant industry. He attends all the major in-plant conferences and has visited more than 130 in-plant operations around the world. He has given presentations to numerous in-plant groups in the U.S., Canada and Australia, including the Association of College and University Printers and the In-plant Printing and Mailing Association. He also coordinates the annual In-Print contest, cosponsored by IPMA and In-plant Graphics.