Powis Parker

Big Show In The Big City
May 1, 2003

An unexpected Spring snowstorm and a down economy couldn't keep attendees from crowding the 10th annual On Demand show. By Bob Neubauer and Mike Llewellyn Despite a surprise spring snowfall that blanketed New York City and weakened first-day attendance, the 10th annual On Demand Digital Printing & Publishing Conference went on as usual early last month. The exhibit hall at the Jacob K. Javits Convention Center seemed much larger this year, due in part to On Demand's co-location with the AIIM Conference & Exposition. As a result, there were 438 exhibitors, compared with 150+ at last year's show. By the event's second day,

Bindery Specifications Guide
February 1, 2003

In-plants sure do a lot of binding. In fact, more in-plants have bindery equipment than offset presses or copiers. According to an IPG survey, the top three pieces of in-plant equipment are paper cutters, folders and drills/punches, with 97+ percent of in-plants saying they own this equipment. Close behind are saddle stitchers (installed in 83 percent of in-plants), collators (81 percent) and spiral wire binders (46 percent). That's because in-plants know that a job isn't finished until it's...well, finished. So maintaining an arsenal of top-notch bindery equipment is essential to providing customers with the quality they expect from an in-plant. Like all

Graph Expo A Pleasant Surprise
November 1, 2002

Higher-than-expected turnout made Graph Expo 2002 an exciting four days for both vendors and attendees. By Mike Llewellyn &012;and Bob Neubauer Graph Expo was back in action last month in Chicago, and from the look of the 380,000-square-foot show floor, the printing industry may soon spring back, as well. Close to 38,000 people attended the show, including buyers representing over 9,600 companies. After last year's big-ticket event, Print '01, was brought to a halt by the September 11 terrorist attacks, it was reassuring to see crowded exhibit areas and overflowing equipment demos this year. David Poulos, director of communications for the event's organizer,

Stitching/Binding Equipment Upgrade And Bring In Business
November 1, 2001

By replacing older stitching and binding equipment with new models, in-plants are bringing new business into their shops. by Bob Neubauer It wasn't the automation. It wasn't the ease of use, either. No, the biggest benefit the Heidelberg ST 90 saddle stitcher brought to Minnesota Life Graphic Services was new business, according to manager Tom Neckvatal. "It opened up the doors for us to do work we couldn't do before," he says. With the ST 90, the in-plant could saddle stitch 96-page books, plus covers. This meant jobs like annual reports, catalogs and manuals were now well within the capabilities of the

Big Shop in Berkeley
December 1, 1999

University of California Printing Services Berkeley, Calif. Annual sales/budget: $15,877,189 Full-time employees: 186 Jobs printed per year: 5,000 To satisfy the printing needs of some 140,000 University of California students attending nine campuses across the state, University of California-Berkeley Printing Services has needed to be flexible. According to George Craig, printing services director, there have been many changes over the years, especially with the emergence of digital technology. Craig recalls bringing in photocomposition and computer business management systems in the '80s, before moving to the direct-to-plate processes and computer-controlled presses of today. Through it all, Craig says, his staff has excelled at adapting to the changes.

Preparing For Change
December 1, 1999

Boeing Printing & Output Service Seattle Annual sales/budget: $56 million Full-time employees: 330 Jobs printed per year: 240,000 Bill Walker, senior manager of printing operations at Boeing, has seen a lot of changes in his 33 years—and he knows that as soon as one technology is mastered, it's time to prepare for the next. "We've about maxed out the gains in our printing operation," says Walker of the shift from camera ready art to the digital original. "Ten years ago, it was tough to get an electronic original because customers didn't think that way. Today, 95 percent of our originals come to us digitally." That change

A Stitch In Time Saves Money
February 1, 1999

Automation and compatibility with digital printing equipment have revolutionized stitching equipment, making operator involvement almost obsolete. "Automation, automation, automation," declares Rick Trapilo, general manager and executive vice president of C.P. Bourg. This, he says, is the primary trend typifying today's stitching equipment. Since operator skill levels vary greatly, Trapilo says, stitching equipment companies are making significant changes to reduce operator involvement. "Threading a stitch head could be difficult for some operators," Trapilo explains. "We're virtually taking that setup issue out of the equation for an in-plant manager." Some automated features now include self-loading, self-threading and operator warning systems in the event of

Open House Policy
December 1, 1998

University of California, Berkeley Berkeley, Calif. University of California-Berkeley Printing Services has a long and distinguished history as the main provider of printed materials for the school. According to George Craig, director of printing services, the university created its first print shop in 1874 in the basement of an early administration building. Up until the 1950s the printing department was combined with the publishing division. When the printing needs of the school became too great, a separate department was born. "It was recognized as an early requirement and has grown since," Craig says of the printing department. Since those days back in

Prize-winning Performance
December 1, 1998

Boeing Printing and Micrographic Services Seattle, Wash. When an in-plant wins Best of Show in the annual IPG/IPMA In-Print contest, it's a sure sign of a top-notch, quality operation. But when a shop takes Best of Show four times in eight years, you know it's got to be one of the best in-plants in the country. That's certainly the truth about Boeing's 111-employee Printing and Micrographic Services department, which won its fourth Best of Show in 1997. Lead by Derek Budworth, the operation has the heavy responsibility of maintaining thousands of active manuals for the aerospace giant's numerous aircraft. It's 65,000-square-foot facility

Graph Expo--Roll Out The Technology
December 1, 1998

Despite falling just a month after IPEX in England, this year's show drew more than 44,000 visitors—and the vendors didn't let them down. When graphic arts industry representatives from all over the world arrived in Chicago for Graph Expo recently, Xeikon decided to shock them a little bit. At a press conference, the Belgium-based digital color press manufacturer contended that digital color production costs are now comparable with offset at runs of 1,000 units or more. Based on a study Xeikon had commissioned, which used real costs and time factors in actual production environments, the company insisted that digital color presses have